DESCRIPTION
Farwest Paint Non-Skid Deck Coating
A non-slip, non-skid acrylic aggregate coating suitable for steel, aluminum, masonry or wood surfaces. It contains a special aggregate combination which withstands rough weather conditions and daily wear and tear.
PRODUCT TYPE: Pigmented waterborne acrylic latex polymer.
Intended Use: For use on wood, steel, aluminum or concrete masonry surfaces: Decks, porches, walkways, ramps, steps, boat decks, bridgeways and numerous other industrial applications.
VISCOSITY: 125 k.u.
DRY TO TOUCH: 1 hour
WEIGHT SOLIDS: 64-66%
TACK FREE: 2 hours
VOLUME SOLIDS:45-47%
TIME TO RECOAT: 24 hours
WEIGHT PER GALLON: 13 lbs. per gal.
DRY HARD: 24 hours
V.O.C.: 37 grams per liter
COLOR RANGE: unlimited range of colors
PRACTICAL COVERAGE: 100 square feet per gallon.
SURFACE PREPARATION: Clean all surfaces of oil, dirt, grease, corrosion and any existing paint that lacks good adhesion. Temperature must be a minimum of 50? F. to apply Deck-Safe.
Steel & Aluminum: Any bare metal should be primed with Farwest AquaShield Red Oxide Primer or Farwest Rynolite Primer according to label directions. Any new aluminum surface should be first etched with Farwest #695 Rynolite Chemical Cleaner-Etcher. Cement & Masonry Surfaces: New concrete surfaces should age for at least 30 days prior to application of Deck Safe.
Wood: For previously painted wood, remove any loose or peeling paint. For glossy surfaces, prepare the surface by applying Farwest #644 Gloss Set (Liquid Sandpaper) to dull finish prior to application of Deck-Safe.
For New Wood: Ensure that the wood is clean and free of all foreign matter, then simply apply Deck-Safe to the substrate.
APPLICATION: Stir Deck-Safe thoroughly before applying. Apply by brush or roller at a spreading rate of 100 square feet per gallon. Allow the surface at least 24 hours before walking on or for recoating.
THINNING: Thinning is not recommended. If absolutely necessary use regular tap water.
CLEAN-UP: Equipment and tools may be cleaned with regular tap water. If clean-up is delayed, clean with Farwest #610 Lacquer Thinner.
A non-slip, non-skid acrylic aggregate coating suitable for steel, aluminum, masonry or wood surfaces. It contains a special aggregate combination which withstands rough weather conditions and daily wear and tear.
PRODUCT TYPE: Pigmented waterborne acrylic latex polymer.
Intended Use: For use on wood, steel, aluminum or concrete masonry surfaces: Decks, porches, walkways, ramps, steps, boat decks, bridgeways and numerous other industrial applications.
VISCOSITY: 125 k.u.
DRY TO TOUCH: 1 hour
WEIGHT SOLIDS: 64-66%
TACK FREE: 2 hours
VOLUME SOLIDS:45-47%
TIME TO RECOAT: 24 hours
WEIGHT PER GALLON: 13 lbs. per gal.
DRY HARD: 24 hours
V.O.C.: 37 grams per liter
COLOR RANGE: unlimited range of colors
PRACTICAL COVERAGE: 100 square feet per gallon.
SURFACE PREPARATION: Clean all surfaces of oil, dirt, grease, corrosion and any existing paint that lacks good adhesion. Temperature must be a minimum of 50? F. to apply Deck-Safe.
Steel & Aluminum: Any bare metal should be primed with Farwest AquaShield Red Oxide Primer or Farwest Rynolite Primer according to label directions. Any new aluminum surface should be first etched with Farwest #695 Rynolite Chemical Cleaner-Etcher. Cement & Masonry Surfaces: New concrete surfaces should age for at least 30 days prior to application of Deck Safe.
Wood: For previously painted wood, remove any loose or peeling paint. For glossy surfaces, prepare the surface by applying Farwest #644 Gloss Set (Liquid Sandpaper) to dull finish prior to application of Deck-Safe.
For New Wood: Ensure that the wood is clean and free of all foreign matter, then simply apply Deck-Safe to the substrate.
APPLICATION: Stir Deck-Safe thoroughly before applying. Apply by brush or roller at a spreading rate of 100 square feet per gallon. Allow the surface at least 24 hours before walking on or for recoating.
THINNING: Thinning is not recommended. If absolutely necessary use regular tap water.
CLEAN-UP: Equipment and tools may be cleaned with regular tap water. If clean-up is delayed, clean with Farwest #610 Lacquer Thinner.
SPECS
Item #
MPN
Farwest Paint Non-Skid Deck Coating, Black
Item #:561494-Black
MPN:X-6712 2003
Farwest Paint Non-Skid Deck Coating, Light Gray
Item #:561494-Gray
MPN:X-6712 2001
Farwest Paint Non-Skid Deck Coating, Dark Gray
Item #:561494-DRKGRY
MPN:X-6712 2002-4
RELATED ITEMS
PRODUCT REVIEWS
PRODUCT FAQs
SHIPPING & RETURNS
Warranty:
The length of the warranty may vary by product, please refer to your product for the exact terms and conditions of the warranty for your purchase.
Return:
- All returns must be recevied within 30 days of receipt.
- Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval.
- Please contact Go2marine LFS Marine and Outdoor for Manufacture Defects, Returns and help with Warranties.