Shields 200 Series Exhaust / Water Hose, No Wire, By The Foot, 1" to 8" ID
DESCRIPTION
Shields 200 Series Marine Exhaust & Water Hose without reinforcement wire is designed for use 1n boat wet exhaust and engine water line systems. 200 series hose meets SAE J2006. Shields 200 Series uses premium fabric reinforcement.
- Meets SAE J2006
- Temperature Range: -20 Deg. to +200 Deg. F continuous and 250 Deg. F intermittent
- Hose to be used in marine water and wet exhaust applications
- Use where wire support is unnecessary
- Heavy wall construction reinforced with 2 plies of tough synthetic spiral cord (4 piles in hose over 8" dia.)
- 3" Max Length is 12' -- can be cut in half to go UPS/FedEx -- Call for cuts.
Hose over 2" diameter or over 6' may require freight shipping and/or a bulk order of 25' roll.
Note: These hoses are cut to customer length and are Not Returnable. Please .
For larger quantities or large diameter hose a freight quote may be required due to shipping restrictions. Our shipping Department will contact you immediately if there is any issue.
SPECS
RELATED ITEMS
PRODUCT REVIEWS
Ratings & Reviews
3 reviews
William Wright
by William Wright
1st time customer. So far so good.
Sent wrong hose.
by Cody
Ordered the 200 series hose with NO wire, was sent the hose WITH wire. I made it work but didn’t need the wire. It was a lot harder to work with. Otherwise shopping was fast and easy purchase.
PRODUCT FAQs
SHIPPING & RETURNS
Warranty:
The length of the warranty may vary by product, please refer to your product for the exact terms and conditions of the warranty for your purchase.
Return:
- All returns must be recevied within 30 days of receipt of the order.
- All cut product are non-returnable
- Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval.
- Please contact Go2marine LFS Marine and Outdoor for Manufacture Defects, Returns and help with Warranties.