DESCRIPTION
Description
Pettit Unepoxy HRT Seasonal Antifouling Paint
Pettit Unepoxy® HRT® seasonal antifouling uses the latest
technology available to create a hybrid paint film strong enough to handle the tough marine environment without building up over time. Hybrid Reactive Technology features high density biocide utilization to maximize effectiveness by using biocide more effectively along with film modifiers to reduce yearly buildup, maintain uniform color consistency, and lower weight while providing a smoother finish than traditional paints. It is a dependable antifouling paint formulated to provide outstanding protection at a very affordable price. Its smooth durable finish is able to withstand beaching, trailering, and season long abuse.
Features:
• Economical hybrid protection
• Smooth durable polishing finish
• Compatible over most bottom paints
Product Information
SDS
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. For more information, go to www.P65Warnings.ca.gov. SPECS
RELATED ITEMS
PRODUCT REVIEWS
Ratings & Reviews
2 reviews
Robert Barraclough
by Robert Barraclough
Great price, easy checkout,so far, so good
Paint
by Mark S.
Product worked well and lasted with out flaking
PRODUCT FAQs
Question: Is HRT Seasonal Antifouling Paint suitable for wood hulls in saltwater?
Dominque S.
Answer: As long as the surface is properly prepared Pettit HRT can be used on a wooden hull in saltwater.
Here's the prep Pettit considers needed: “Bare wooden hulls should be sanded thoroughly with 80-grit sandpaper and wiped clean of sanding residue. A coat of 6627 Tie-Coat Primer thinned 25% with 97 Epoxy Thinner should be applied directly to the bare wood. Allow drying 4 hours and then applying two un-thinned coats of Unepoxy HRT per instructions. Existing, hard antifouling paint should be thoroughly sanded. If priming is necessary on bare wood spots, apply a touch- up coat of 6627 Tie-Coat Primer thinned 25% with 97 Epoxy Thinner to these areas. Then apply the subsequent coats of Unepoxy HRT.”
SHIPPING & RETURNS
Warranty:
The length of the warranty may vary by product, please refer to your product for the exact terms and conditions of the warranty for your purchase.
Return:
- All returns must be recevied within 30 days of receipt of the order.
- Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval.
- Please contact Go2marine LFS Marine and Outdoor for Manufacture Defects, Returns and help with Warranties.